Products

Carbon molecular sieve(CMS) SLCMS-USP/H has the advantage of high nitrogen production rate,low air-nitrogen ratio and low ash content,which make more economical to produce 99.999% nitrogen at one time by the PSA method.

Carbon molecular sieve(CMS) type SLUHP-100 as one representative of SHANLI products,has been far more than the industry level in Chinese market,and in the leading level of the world.It produces 99.999% concentration nitrogen more economical via PSA method.

Carbon molecular sieve(CMS) type SLCMS-USP/L aim at getting high purity nitrogen gas with low air consumpation,which make it more economical to produce 99.999%-99.9999% nitrogen at one time by the PSA technology.

SL-506HA deoxidizer is precious metal - alumina system deoxy catalyst, the principle is to catalyze the reaction of hydrogen and oxygen, to deoxygenation. The catalytic deoxidizer can be used for hydrogen deoxidation,or nitrogen, carbon dioxide and argon, helium and other inert gas hydrodeoxygenation.  

SLCMS-OG carbon molecular sieve, designed for pressure swing adsorption (PSA) oxygen purification.The adsorbent has the advantages of high concentration of oxygen enrichment and high product recovery, which can increase oxygen purity to more than 99.5%.

SLCMS-CBG type methane gas purification adsorbent is specially designed for purifying methane gas by using pressure swing adsorption (PSA) process.The adsorbent has the advantages of high enrichment concentration and high product recovery rate for methane gas.This adsorbent uses the different diffusion rates of gases on the surface of the adsorbent to separate gases. It basically does not adsorb methane gas, but focuses on adsorbing other small molecule gases such as nitrogen and carbon dioxide.

Shanli Activated Alumina Desiccant is a porous, highly dispersible solid material.It has the characteristics of large water absorption and fast drying speed. It will not expand,deform, or crack after absorbing water, and will not cause damage to equipment.

13X-HP Molecular Sieve is a new type of X-type molecular sieve, a special molecular sieve for oxygen production.  Shanli 13X-HP molecular sieve has the Characteristics of high nitrogen adsorption capacity, excellent nitrogen and oxygen separation coefficient, higher oxygen production purity, faster adsorption speed, longer service life, etc.

13X-APG  is a special molecular sieve produced to meet the special requirements of the cryogenic air separation industry, further improve the adsorption capacity of molecular sieves for carbon dioxide and water, and avoid the freezing tower phenomenon during the air separation process.  

Activated carbon molecular sieve(CMS) SLCMS-G1.3 is a new kind of adsorbent, which has the advantages of high concentration of oxygen enrichment and low air consumption.

SLCMS-220 240 260 as one representative of SHANLI products,specifically designed for the enrichment of nitrogen from the air. The nitrogen can be obtained directly from the air via Pressure Swing Adsorption(PSA) technology at room temperature.

Carbon molecular sieve(CMS) type SLCMS-228 is a new kind of non-polar adsorbent,specifically designed for the enrichment of nitrogen from the air. The nitrogen can be obtained directly from the air via Pressure Swing Adsorption(PSA) technology at room temperature.